Tag Archives: estándar

Indian Standard – IS 8119 ESPECIFICACIÓN PARA TUBERÍA DE ACERO CON FRENO DE COBRE

0. FOREWORD 0.1 This Indian Standard was adopted by the Indian Standards Institution on 15 July 1976, after the draft finalized by the Steel Tubes, Pipes and Fittings Sectional Committee had been approved by the Structural and Metals Division Council. 0.2 There has been a long felt need for copper brazed steel tubes used specially in […]

Pruebas y procedimientos SAE J1677 para tubos de acero al carbono y acero de baja aleación

1. SCOPE This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and alloy steel tubing listed in 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications. 2. REFERENCES 2.1 Applicable Publications The following publications form […]

Especificación estándar ASTM A254 para tubos de acero soldados con cobre

This standard is issued under the fixed designation A 254; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or re-approval. […]

SAE J527 tubería de acero de bajo carbono con doble capa soldada

1. Scope—This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing. 2. References 2.1 Applicable Publications—The following publications form a part of this specification to the extent specified herein. Unless otherwise specified, the […]

GM123M GM124M Standard – Tubería de acero automotriz para manejo de fluidos

1 Scope These specifications cover two types of steel tubing suitable for automotive uses. There are requirements for the base metal, the optional coating materials, and the coated tubing. These requirements are applicable to the product coming out of the tube mills and the coating application lines, which are sometimes separate facilities. This tubing is […]

¡Muestras gratis!
Envío al mundo entero

¡Contáctenos ahora mismo!Contact Us Right Now!